MS110P
10-Port 10/100Mbps Desktop Switch with 8-Port PoE+
- 10 Ports: 10× 10/100 Mbps RJ45 ports with 8 PoE+ ports
- Two Cables in One: With 8 PoE+ ports, transfers data and power on one single cable
- High Power PoE+: Support PoE Power up to 30 W for each PoE port and 65 W for all PoE ports*
- 2× Uplink Ports: MS110P provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR.
- Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode*
- Isolation Mode: One click to divide traffic for specific ports for stability and security
- Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs
- Durable Metal Casing: Allows for efficient heat dissipation and long network life
- Plug and Play: Simple to use and saves time and effort
- PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
10-Port 10/100Mbps Desktop Switch with 8-Port PoE+
MS110P
Long-Range up to 250m
Durable Metal Casing
65W PoE Budget
65W
PoE Budget 8×
PoE+ Ports
Plug and Play
Long-Range up to 250 m
Isolation Mode
PoE Auto Recovery
Silent Operation
Durable Metal Casing
8 PoE+ Ports (65 W Budget) for Network Deployment
Ports 1-8 support PoE+, and each of them supports a maximum of 30 W and is compliant with the 802.3af/at Powered Devices. MS110P provides 2 ports without PoE+ for uplink devices, one of which is used to connect to the Internet and the other to connect to the NVR. The total 65 W PoE power budget* for the 8× PoE+ ports enables a variety of uses, including surveillance for offices, dormitories, and small businesses. IP cameras, access points, IP phones, PCs, video recorders, and more are all completely compatible with it.
Router
Data Only
30W
Max on Each Port
65W
Total Power Budget
Data Only
Network Video Recorder
IP Camera
IP Phone
Access Point
Power over Ethernet: Two Cables in One
-
-
Traditional Switches
-
Power Data
-
-
-
MS110P
-
Power + Data
-
Long-Range up to 250 m with Extend Mode**
Extend Mode** increases PoE transmission distance to 250 m. MS110P has 8 long-range ports with PoE+. Turn on the Extend Mode and make it ideal for installing surveillance cameras over wide areas.
-
Traffic Separation
With only one click, isolation mode divides traffic for ports 1-8 to prevent snooping/tampering and isolate broadcast storms for greater protection. MS110P provides 2× uplink ports when turning on the isolation mode.
-
Port Prioritization
Prioritizing the data of specific ports would ensure the high quality of delicate applications, such as voice and video, in crucial business domains.
-
PoE Auto Recovery
The switch continuously detects data transmission with PoE-powered devices (PD). When a PD stops sending data packets to the switch for an extended length of time, the switch will reboot it automatically.
-
Plug and Play
MS110P offers auto-negotiation (10/100 M) and automated MDI/MDIX. There is no additional configuration needed. It is simple to use and saves time and effort.
Durable and Silent
MS110P's durable metal case allows for efficient heat dissipation, excellent signal interference prevention, equipment stability, and long network life.
-
Durable Metal Casing
-
Silent Operation
-
Wall Mount
6.7 in
3.9 in
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors. **The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
- Hardware
- Dimensionen
171*98*27 mm
- PoE Anschlüsse
RJ45
Standard: Compliant with 802.3 af/at Powered Devices
PoE Ports: Port 1- Port 8
PoE Power Budget: 65 W- Interfaces
10× 10/100 Mbps Ports, Auto-Negotiation, Auto MDI/MDIX
- External Power Supply
External Power Adapter (Output: 53.5V/1.31A)
- Installation
Desktop
Wall Mount
- Standards and Protocols
IEEE 802.3x Flow Control
- Data Rates
10/100 Mbps at Half Duplex
20/200 Mbps at Full Duplex- Jumbo Frame
2 KB
- Mac-Adresstabelle
2K
- Maximaler Stromverbrauch
2.96W（220 V / 50 Hz, no PD connected）
77.52W（220 V / 50 Hz, with 65W PD connected）
- Maximaler Stromverbrauch
10.064 BTH/h （no PD connected)
263.568 BTH/h（with 65W PD connected）
- Sonstiges
- Package Contents
• 10-Port 10/100Mbps Desktop Switch with 8-Port PoE+ (MS110P)
• Power Adapter
• Quick Installation Guide- Environment
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% RH non-condensing
Storage Humidity: 5%~95% RH non-condensing