MS106LP
6-Port 10/100Mbps Desktop Switch with 4-Port PoE+
- 6 Ports: 6× 10/100 Mbps RJ45 ports with 4 PoE+ ports
- Two Cables in One: With four PoE+ ports, transfers data and power on one single cable
- High Power PoE+: Support PoE Power up to 30 W for each PoE port and 40 W for all PoE ports*
- 2× Uplink Ports: MS106LP provides 2× uplink ports when turning on the isolation mode. One for connecting to the Internet and one for connecting to the NVR.
- Long-Range up to 250 m: Increases PoE transmission distance to 250 m by Extend Mode*
- Isolation Mode: One click to divide traffic for specific ports for stability and security
- Compliant with Powered Devices: Works with IEEE 802.3af/at compliant PDs
- Durable Metal Casing: Allows for efficient heat dissipation and long network life
- Plug and Play: Simple to use and saves time and effort
- PoE Auto Recovery: Automatically reboots your dropped or unresponsive PoE-powered devices
6-Port 10/100Mbps Desktop Switch with 4-Port PoE+
MS106LP
Long-Range up to 250 m
Durable Metal Casing
40W PoE Budget
40 W
PoE Budget
4×
PoE+ Ports
Plug and Play
Long-Range up to 250 m
Isolation Mode
PoE Auto Recovery
Silent Operation
Durable Metal Casing
4 PoE+ Ports (40 W Budget) for Network Deployment
Ports 1-4 support PoE+, and each of them supports a maximum of 30 W and is compliant with the 802.3af/at Powered Devices. MS106LP provides 2 ports without PoE+ for uplink devices, one of which is used to connect to the Internet and the other to connect to the NVR. The total 40 W PoE power budget* for the 4× PoE+ ports enables a variety of uses, including surveillance for offices, dormitories, and small businesses. IP cameras, access points, IP phones, PCs, video recorders, and more are all completely compatible with it.
Router
Data Only
Data Only
Network Video Recorder
30W
Max on Each Port
40W
Total Power Budget
IP Camera
IP Phone
Access Point
Data and Power
Power over Ethernet: Two Cables in One
-
-
Traditional Switches
-
Power Data
-
-
-
MS106LP
-
Power + Data
-
Long-Range up to 250 m with Extend Mode**
Extend Mode** increases PoE transmission distance to 250 m. MS106LP has four long-range ports with PoE+. Turn on the Extend Mode and make it ideal for installing surveillance cameras over wide areas.
Port 1-4
-
Traffic Separation
With only one click, isolation mode divides traffic for ports 1-4 to prevent snooping/tampering and isolate broadcast storms for greater protection. MS106LP provides 2× uplink ports when turning on the isolation mode.
-
Port Prioritization
Prioritizing the data of specific ports would ensure the high quality of delicate applications, such as voice and video, in crucial business domains.
-
PoE Auto Recovery
The switch continuously detects data transmission with PoE-powered devices (PD). When a PD stops sending data packets to the switch for an extended length of time, the switch will reboot it automatically.
Plug and Play
MS106LP offers auto-negotiation (10/100M) and automated MDI/MDIX. There is no additional configuration needed. It is simple to use and saves time and effort.
Durable and Silent
MS106LP's durable metal case allows for efficient heat dissipation, excellent signal interference prevention, equipment stability, and long network life.
-
Durable Metal Casing
-
Silent Operation
-
Wall Mount
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors. **The speed of the ports in extend mode will downgrade to 10 Mbps. The actual transmission distance may vary due to power consumption of PoE-powered devices or the cable quality and type.
- Hardware
- Dimensions (W X D X H)
99.8*98*25mm
- PoE Ports
RJ45
Standard: Compliant with 802.3 af/at Powered Devices
PoE Ports: Port 1- Port 4
PoE Power Budget: 40 W- Interfaces
6× 10/100 Mbps Ports, Auto-Negotiation, Auto MDI/MDIX
- External Power Supply
External Power Adapter (Output: 53.5V/0.81A)
- Standards and Protocols
IEEE 802.3x Flow Control
- Data Rates
10/100 Mbps at Half Duplex
20/200 Mbps at Full Duplex- Jumbo Frame
2 KB
- Mac Address Table
2K
- Max Power Consumption
1.87W（22/50 Hz, no PD connected）
44.8W（220/50 Hz, with 40W PD connected）
- Max Heat Dissipation
6.34 BTH/h （no PD connected)
152.32 BTH/h（with 40W PD connected）
- Others
- Package Contents
• 6-Port 10/100Mbps Desktop Switch with 4-Port PoE+ (MS106LP)
• Power Adapter
• Quick Installation Guide- Environment
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% RH non-condensing
Storage Humidity: 5%~95% RH non-condensing