How to use VPN Client to access a remote VPN Server

VPN Client is used to create VPN connections for devices in your home network to access a remote VPN server.

To use the VPN feature, simply configure a VPN connection and choose the devices you want on your router; then, these devices can access the remote VPN server. Please follow the steps below:

*Image may differ from your actual product.

1. Visit http://mwlogin.net and log in with your Mercusys ID or the password you set for the router.

2. Go to Advanced > VPN Client. Note: Firmware update may be required to support VPN Client.

3. Enable the VPN Client, then save the settings.

4. Add VPN servers and enable the one you need.

1) In the Server List section, click Add.

2) Specify a Description for the VPN, and choose the VPN Type.

3) Enter the VPN information provided by your VPN provider.

• OpenVPN: Enter the VPN username and password if required by your VPN provider; otherwise, simply leave them empty. Then, import the configuration file provided by your VPN provider.

Note: You can also check the box to import the CA file or edit the .ovpn file manually, then upload the CA file or manually configure the settings.

• PPTP: Enter the VPN server address and the VPN username and password provided by your VPN provider.

• L2TP/IPSec VPN: Enter the VPN server address, VPN username and password, and IPSec pre-shared key provided by your VPN provider.

• WireGuard VPN: Give a description, and click BROWSE to import the WireGuard VPN server configuration. Then, you will see the detailed parameters. Do NOT change the parameters unless necessary

4) Save the settings.

5) In the server list, Enable the VPN server you need.

5. Add and manage the devices that will use the VPN function.

1) In the Device List section, click Add.

2) Choose and add the devices that will access the VPN server you have configured.

6. Save the settings.

Done! Now, the devices you specified can access the VPN server you enabled.